GEB-500

GEB-500

300 to 500 kg · 23 hours

The GEB-500 system is designed for use in collective catering, mid-sized supermarkets, and small food-processing businesses.

Request a quote

Advantages

  • Treats food waste on the production site
  • Reduces its volume by 80 to 90% depending on moisture content
  • Simple to use
  • Sealed tank
  • Odor control
  • Minimal resources and hookups needed (power and water drain)
  • Quiet operation
  • Treatment with no micro-organisms, enzymes, or additives
  • The finished product is dry and stabilized. It can be stored freely in a dry place.

Process

The GEB dehydrator uses a condensation system. The product is heated and stirred in a sealed tank. The closed hot-air circuit coupled with the condenser drains water by gravity. The cycle time is about 23 hours.

Technical description

The machine has a processing tank fitted with two sealed doors (loading and unloading). A shaft/paddle assembly driven by a gear motor stirs the product. The tank is heated independently of the air circuit. Heating is provided by electric resistors. The condenser, placed at the rear, drains the water. A catalytic system is placed in series in the air circuit and reduces odors. The tank and air heating regulators operate independently. The end of the cycle is automatic.

Finish

All external surfaces are polished stainless steel 316L.

Spec sheet
Processing methodThermal dehydration
ConfigurationStandalone, movable
Load capacity300 to 500 kg
Average reduction80-90%
Processing time23 hours
Power supplyThree-phase, 50 Amps / AC 380V-50Hz / 3P+1N+Ground
Power consumption11 kWh
Dimensions (L × W × H)220x145x175 cm
Weight1120 kg
MaterialStainless steel 316L
Safety equipmentSafety sensors on loading and unloading doors
Drying methodGravity-drain condensation
Process controlIndependent temperature regulation, motor protection control, door-open indicator, automatic end-of-cycle shutdown
Odor treatmentOdor reduction via thermal catalyst
Warranty2 years
GEB-500
GEB-500 avec chargeur-basculeur

Automated bin loader/tipper (120 or 240 liters). Loading the machine is handled by a bin lift with two-hand controls.

220x245x164 cm with the loader (vs. 220x145x175 cm in the standard version).

Accepted materials

  • Food and organic waste

Not accepted

  • Metal
  • Plastic
  • Glass
  • Petrochemical waste

Sectors using this model

Is this model the right fit?

Tell us about your volumes and we'll confirm this is the right size for you.

Request a quote